RHINO FM100 Manual del operador descargar pdf (Pagina 88)

Maintenance Section 5-6

FM100 02/04

MAINTENANCE

BELT ADJUSTMENT PROCEDURE Figure 7.

Shut off mower and tractor. . Loosen jam nut (item 1) on tension adjustment bolt (item 2). Tighten adjustment bolt

(item 3) until belt deflection along front of belt (item 4) is 3/4" with approximately 10 pounds applied to center of

length. DO NOT OVERTIGHTEN. Tighten jam nut (item 1).

BELT REMOVAL/INSTALLATION Figure 7.

FIGURE 7

Shut off mower and tractor. Remove belt shield fasteners and belt shields. Loosen tension on belts as

described above. Slip old belts under gearbox mount plate and under center spindle sheave (item 5). Slip

new belts under gearbox mount plate and under center spindle sheave ). Feed belts as shown in Figure 7

and tighten belts as described in the Belt Adjustment Procedure. Reinstall shields and shield fasteners.

Gearbox Mount Plate

Deflection is 3/4" when

applying 10 Lbs of

preasure

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 99 100

Sin comentarios

RHINO FM100 Manual del operador Pagina 88