RHINO RC456 Manual del operador descargar pdf (Pagina 14)

TRANSPORTING

To transport, retract the wings until they are in place against the tongue and install the locking pins so the pins capture

the lugs on the wings. Secure the pins in place with hairpin cotter pins.

CAUTION! Never transport rakes without locking pins in place.

Avoid sharp turns during transport to prevent contact between the rakes and the machine. Slow down when approaching

trees, fences, or ditches to avoid damage to rakes.

CAUTION! When towing on public roads, a slow moving vehicle (SMV) sign should be installed on the tractor so

it is visible to vehicles following. Warning lights should also be installed on the tractor so they are

visible to other motorists. Comply with state and local safety requirements at all times.

MAINTENANCE

1. Check hydraulic hoses periodically for cracks, abrasions, or leaks. Replace defective hoses immediately. Replace

worn or broken hoses and fittings with factory replacement parts only.

2. To extend the life of the hydraulic cylinder and hoses, store the machine under cover. If cover is not available, remove

the cylinder and hoses and store under cover.

3. Check tightness of lug bolts and spindle setscrews after one hour of operation and every six months thereafter.

Check tire pressure whenever maintenance is performed.

LUBRICATION

Lubricate all points before operating for the first time and periodically as shown in the chart below. Keep all lubrication

fittings free of dirt and contaminates.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Sin comentarios

RHINO RC456 Manual del operador Pagina 14